高速护坡模具的问世虽然使我国的道路污染减少了很多,使得道路两侧也变得工整起来,但是模具是不能独立承担道路环境职责的,现在我国道路污染严重并不是模具的无能,而是垃圾污染,模具使得我国的道路变得工整了,但是路面上的垃圾却是人们日常随手丢弃从而导致的,道路环境污染靠大家,任凭模具尽职尽责也是不可能使得道路无污染的。
The emergence of high-speed slope protection molds has greatly reduced road pollution in China and made both sides of the road more tidy. However, molds cannot independently assume road environmental responsibilities. The serious road pollution in China now is not due to the incompetence of molds, but rather garbage pollution. Models have made our roads more tidy, but the garbage on the road is casually discarded by people on a daily basis, and road environmental pollution depends on everyone, It is impossible to make the road pollution-free even if the mold is diligent and responsible.
由于道路建设的需要使得高速护坡模具的利润非常高,但是随着时间的推移道路对于模具的需求越来越大,然而生产企业却面临了新的挑战。如,经济发展迅速使得员工工资上涨、原材料价格也不断上涨、模具生产企业越来越多,这些结果也导致了一些企业出现亏损并且无法改变从而导致企业倒闭,这也对模具行业的发展带来了很大的冲击。
Due to the need for road construction, the profit of high-speed slope protection molds is very high. However, with the passage of time, the demand for molds on roads is increasing. However, production enterprises are facing new challenges. For example, rapid economic development has led to an increase in employee wages, a continuous rise in raw material prices, and an increasing number of mold production enterprises. These results have also led to losses for some enterprises that cannot be changed, resulting in their bankruptcy. This has also had a significant impact on the development of the mold industry.
高速护坡模具的制作材料为聚丙烯,由于聚丙烯具有韧性强、寿命长、抗压、可回收等特点所以用其制作而成的模具的人在模具系列中是最多的。但是使用时间长了也会出现问题的,如:1、磨损,俗话说滴水石穿,长时间使用模具进行生产也是一个道理,但是断其时间是不会影响使用的。2、变形,塑料模具不比钢模具,这也是所有塑料模具的一个通病。生产是如果小心注意的话问题也不大,但是不注意会导致生产出来的护坡砖畸形,在修复又费时费力。3、断裂,这种问题常出现于冬天,由于气温低,出模时用力太大就会导致断裂,也有可能是质量的原因,一个质量好的高速护坡模具最少能使用2年以上的,但是也需要多保养。
The material used for making high-speed slope protection molds is polypropylene. Due to its strong toughness, long service life, compression resistance, and recyclability, polypropylene is the most commonly used mold in the mold series. However, problems can also arise after prolonged use, such as: 1. Wear and tear. As the saying goes, every drop wears away. Using molds for a long time in production is also a principle, but cutting them off for a long time will not affect their use. 2. Deformation, plastic molds are not as good as steel molds, which is also a common problem among all plastic molds. If careful attention is paid to production, there may not be any problems, but not paying attention can lead to deformed slope protection bricks produced, which is time-consuming and laborious to repair. 3. Fracture, a common problem in winter, can occur due to low temperatures and excessive force during demolding. It may also be due to quality issues. A high-quality high-speed slope protection mold can last for at least 2 years, but it also requires more maintenance.